Switchcfgpersistentdisable - Brocade Communications Systems Brocade 8/12c Command Reference Manual

switchCfgPersistentDisable

Disables a switch persistently.
SYNOPSIS
switchcfgpersistentdisable
DESCRIPTION
Use this command to persistently disable the switch. All Fibre Channel ports are taken offline. If the
switch was part of a fabric, the remaining switches reconfigure. The switch remains disabled even after a
reboot.
As each port is disabled, the front panel LEDs change to a slow-flashing amber.
You can temporarily enable a persistently disabled switch with the switchEnable command. A
temporarily enabled switch remains disabled after a reboot.
NOTES
Performance Monitoring cannot be added to any port on a persistently disabled switch.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To disable a switch persistently:
SEE ALSO
switchDisable, switchEnable, switchCfgPersistentEnable,
Fabric OS Command Reference
53-1001764-01
switch:admin> switchcfgpersistentdisable
Switch's persistent state set to 'disabled'
switchCfgPersistentDisable
switchShow
22
967