Fwmailcfg - Brocade Communications Systems Brocade 8/12c Command Reference Manual

Brocade fabric os command reference manual supporting fabric os v7.0.0 (april 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

fwMailCfg

Displays and configures Fabric Watch email alerts.
SYNOPSIS
fwmailcfg
DESCRIPTION
Use this command to display or modify the configuration and status of the Fabric Watch email alert on
the switch.
Switch elements monitored by Fabric Watch are divided into classes, and e-mail alerts are based on the
classes. Each class can configure up to five e-mail addresses as the alert message's receiver. Multiple
e-mail addresses must be separated by a comma. The e-mail addresses must conform to standard
syntax string@domain.suffix. Default domains are not automatically appended. Invalid e-mail addresses
are rejected. "NONE" is the default address and a valid input parameter.
In Access Gateway mode, only the following classes are supported.
For an e-mail alert to function correctly, add the CP0 and CP1 IP addresses and host names to DNS and
also set the domain name and name server. The ipAddrShow and dnsConfig commands can be used
to set and verify this information.
NOTES
This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To configure email settings:
Fabric OS Command Reference
53-1001764-01
Environment class
SFP class
Port class
F/FL Port (Optical) class
F/FL Port (Copper) class (embedded platforms only)
Resource class
switch:admin> fwmailcfg
1
: Show Mail Configuration Information
2
: Disable Email Alert
3
: Enable Email Alert
4
: Send Test Mail
5
: Set Recipient Mail Address for Email Alert
6
: Relay Host IP Configuration
7
: Quit
Select an item
=> : (1..7) [7]1
Config Show Menu
--------------------------------------
1
: Environment class
2
: SFP class
3
: Port class
4
: Fabric class
5
: E-Port class
6
: F/FL Port (Optical) class
7
: Alpa Performance Monitor class
8
: End-to-End Performance Monitor class
22
fwMailCfg
395

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.0

Table of Contents