Brocade Communications Systems Brocade 8/12c Command Reference Manual page 65

Brocade fabric os command reference manual supporting fabric os v7.0.0 (april 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

To disable auto port configuration policy when the switch is disabled:
To enable the ADS policy:
To disable the ADS policy:
To enable the WWN load balancing policy:
To disable the WWN load balancing policy:
AG port mapping commands
To display current port mappings and port grouping policies:
Explanation of fields in --mapshow output:
To clear all F_Ports mapped to the configured primary N_Port 0:
To add F_Ports 4 and 6 to N_Port 0 (observe that Port 0 has no configured F_Ports):
Fabric OS Command Reference
53-1001764-01
switch:admin> ag --policydisable auto
Default factory settings will be restored.
Default mappings will come into effect.
Please save the current configuration using configupload.
Do you want to continue? (yes, y, no, n): [no] y
Access Gateway configuration has been restored \
to factory default
switch:admin> ag --policyenable ads
switch:admin> ag --policydisable ads
switch:admin> ag --policyenable wwnloadbalance
switch:admin> ag --policydisable wwnloadbalance
switch:admin> ag --mapshow
N_Port Configured Static
_F_Ports
_F_Ports F_Ports
-----------------------------------------------------------------
0
4;5;6
None
1
7;8;9
None
2
10;11
None
3
12;13
None
------------------------------------------------------------------
Static F_Ports are part of as static F_Port to N_Port mapping.
Current F_Ports are the F_Ports that are currently online and mapped to a given N_Port either
because they are mapped to that N_Port or as a result of N_Port failover.
Configured F_Ports are the F_Ports that are explicitly mapped to this N_Port (saved in config).
Failover and Failback indicate whether or not N_Port policy is enabled (1) or disabled (0).
PG_ID is the Port Group ID and PG_Name is the Port Group Name.
switch:admin> ag --mapset 0 ""
F_Port to N_Port mapping has been updated successfully
switch:admin> ag --mapset 0 "4;6"
F_Port to N_Port mapping has been updated successfully
Current Failover Failback PG_ID PG_Name
4;5;6
1
0
7;8;9
0
1
10;11
1
0
12;13
0
1
ag
2
SecondFabric
0
pg0
2
SecondFabric
0
pg0
22
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.0

Table of Contents