Brocade Communications Systems Brocade 8/12c Command Reference Manual page 64

22
ag
To display the current Access Gateway mode:
AG group policy commands
To show current policies:
To enable a port grouping policy:
To disable a port grouping policy
To enable auto port configuration policy when both policies are disabled and the switch is already
disabled:
30
2 0x6d0c00 20:0c:00:05:1e:37:11:aa 1 0 10.32.74.109 10;11;
3 0x6d0d00 20:0d:00:05:1e:37:11:aa 0 1 10.32.74.109 12;13;
-----------------------------------------------------------
F_Port information :
Port PortID Attached PWWN
----------------------------------------------------------
4 0x6d0a01 21:00:00:e0:8b:83:e3:cd
5 0x6d0a02 21:01:00:e0:8b:a3:e3:cd
6 0x6d0a03 21:00:00:e0:8b:83:3e:ce
7 0x6d0b01 21:01:00:e0:8b:a3:3e:ce
8 0x6d0b02 21:00:00:e0:8b:83:5c:cd
9 0x6d0b03 21:01:00:e0:8b:a3:5c:cd
10 0x6d0c02 10:00:00:06:2b:0a:a3:93
11 0x6d0c01 10:00:00:06:2b:0a:a3:92
12 0x6d0d02 10:00:00:06:2b:0a:a3:91
13 0x6d0d01 10:00:00:06:2b:0a:a3:90
---------------------------------------------------------
switch:admin> ag --modeshow
Access Gateway mode is enabled.
switch:admin> ag --modeshow
Access Gateway mode is NOT enabled.
switch:admin> ag --policyshow
AG Policy
-----------------------------------------------------
Port Grouping
Auto Port Configuration
Advanced Device Security
WWN Based Load Balancing
-----------------------------------------------------
switch:admin> ag --policyenable pg
switch:admin> ag --policydisable pg
switch:admin> ag --policyenable auto
All Port related Access Gateway configurations will be lost.
Please save the current configuration using configupload.
Do you want to continue? (yes, y, no, n): [no] y
N_Port Preferred
N_port
0 2
0 2
0 2
1 3
1 3
1 3
2 0
2 0
3 1
3 1
Policy Name State
pg Enabled
auto Disabled
ads Disabled
wwnloadbalance Disabled
login
exceeded?
no
no
no
no
no
no
no
no
Fabric OS Command Reference
53-1001764-01