Supportshowcfgshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

supportShowCfgShow

supportShowCfgShow
Displays the groups of commands enabled for display by the supportShow command.
SYNOPSIS
supportshowcfgshow
DESCRIPTION
Use this command to display the groups of commands enabled for display by the supportShow
command. Use the supportShowCfgEnable and the supportShowCfgDisable commands to modify
which groups are displayed.
The FCIP commands are supported only on the Brocade 7800/FX8-24 and FR4-18i platforms and
cannot be configured to collect or display data on unsupported platforms.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display command groups configured for data collection on the Brocade 6510:
To display command groups configured for data collection on the Brocade 7800
964
switch:admin> supportshowcfgshow
os enabled
exception enabled
port enabled
fabric enabled
services enabled
security enabled
network enabled
portlog enabled
system enabled
extend disabled
filter disabled
perfmon disabled
ficon disabled
iswitch disabled
asic_db enabled
fcip disabled (not applicable to this platform)
ag disabled
switch:admin> supportshowcfgshow
os enabled
exception enabled
port enabled
fabric enabled
services enabled
security enabled
network enabled
portlog enabled
system enabled
extend disabled
filter disabled
perfmon disabled
ficon disabled
Fabric OS Command Reference
53-1001764-01