Dell PowerConnect W-7200 Series Reference Manual page 1172

Parameter
new version packets
unknown version number
bad packet format
packets processed
bad authentication
packets rejected
system peer
system peer mode
leap indicator
stratum
precision
root distance
root dispersion
reference ID
reference time
system flags
jitter
stability
broadcastdelay
authdelay
Related Commands
To configure an NTP server, use the command
1172 | show ntp status
Description
Number of packets that match the current NTP version.
Number of packets with an unknown NTP version.
Number of NTP packets dropped due to an invalid packet format.
Number of NTP packets received and processed by the controller.
Number of NTP packets that failed to be authenticated.
Number of NTP packets rejected because they had an invalid format.
The IP address of the peer NTP server.
The peer mode of this remote association:
Symmetric Active
l
Symmetric Passive
l
Client
l
Server
l
Broadcast
l
This parameter indicates whether or not a leap-second should be inserted or removed
at the end of the last day of the current month.
00 no warning
l
01 +1 second (following minute has 61 seconds)
l
10 -1 second (following minute has 59 seconds)
l
The stratum level of the peer
The advertised precision of the switch. This value can range from -4 and -20, inclusive.
Total round trip delay to the stratum 1 reference clock.
Total dispersion to the stratum 1 reference clock. This value is a cumulative measure of
all errors associated with the network hops and servers between the NTP server and its
stratum 1 server.
IP address of the remote NTP server
Time when the local system clock was last set or corrected, in NTP timestamp
format.
This parameter displays any flags configured for this NTP entity.
The average magnitude of jitter between several time queries.
The average magnitude of offset between several time queries
The broadcast delay of this NTP server association, in seconds.
The authentication delay of this NTP server association, in seconds.
ntp server.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide