Dell PowerConnect W-7200 Series Reference Manual page 1186

show priority-map
show priority-map
Description
Displays the list of priority maps on a interface.
Syntax
No parameters.
Example
The output of this command shows the priority maps configured on all interfaces.
(host) # show priority-map
Priority Map
-------------
ID Name DSCP-TOS
-- ---- --------
1 my-map 4-20,60
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms
All platforms
1186 | show priority-map
DOT1P-COS
---------
4-7
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide