Table of Contents
Advertisement
show netstat
show netstat [stats]
Description
Show current active network connections.
Syntax
Parameter
<string>
Usage guidelines
Issue this command without the optional stats parameter to view a complete table of active network connections.
Include the stats parameter to display aggregate statistics for IP, ICMP, TCP and UDP protocols.
Example
The following example shows incoming and outgoing packet statistics for the controller.
(host) #show netstat stats
Ip:
1084012095 total packets received
2 with invalid headers
3 forwarded
426940 incoming packets discarded
932097114 incoming packets delivered
1004595164 requests sent out
52847 fragments dropped after timeout
201323411 reassemblies required
50179757 packets reassembled ok
53204 packet reassembles failed
136827034 fragments created
Icmp:
1969625 ICMP messages received
5 input ICMP message failed.
ICMP input histogram:
destination unreachable: 1752058
timeout in transit: 1684
redirects: 70805
echo requests: 145073
echo replies: 5
249806 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 51944
time exceeded: 52796
redirect: 2
echo replies: 145064
Tcp:
3 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
1164 | show netstat
Description
Show network statistics, filtered by protocol type.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Advertisement
Table of Contents
