Chapter 32 Gratuitous Arp Command List - D-Link DGS-3120-48PC Reference Manual

xStack
Chapter 32
config gratuitous_arp send ipif_status_up [enable | disable]
config gratuitous_arp send dup_ip_detected [enable | disable]
config gratuitous_arp learning [enable | disable]
config gratuitous_arp send periodically ipif <ipif_name 12> interval <value 0-65535>
enable gratuitous_arp {ipif <ipif_name 12>} {trap | log}(1)
disable gratuitous_arp {ipif <ipif_name 12>} {trap | log}(1)
show gratuitous_arp {ipif <ipif_name>}
32-1 config gratuitous_arp send ipif_status_up
Description
The command is used to enable/disable sending of gratuitous ARP request packet while IPIF
interface become up. This is used to automatically announce the interface's IP address to other
nodes. By default, the state is disabled, and only one gratuitous ARP packet will be broadcast.
Format
config gratuitous_arp send ipif_status_up [enable | disable]
Parameters
enable - Enable sending of gratuitous ARP when IPIF status become up.
disable - Disable sending of gratuitous ARP when IPIF status become up.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable send gratuitous ARP request in normal situation:
DGS-3120-24TC:admin# config gratuitous_arp send ipif_status_up enable
Command: config gratuitous_arp send ipif_status_up enable
Success.
DGS-3120-24TC:admin#
32-2 config gratuitous_arp send dup_ip_detected
Description
The command is used to enable/disable sending of gratuitous ARP request packet while duplicate
IP is detected. By default, the state is disabled.For this command, the duplicate IP detected means
®
DGS-3120 Series Managed Switch CLI Reference Guide
Gratuitous ARP Command
List
299