D-Link DGS-3120-48PC Reference Manual page 72

®
xStack
Format
create authen_login method_list_name <string 15>
Parameters
<string 15> - The user-defined method list name. This value can be up to 15 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To create a user-defined method list for user login:
DGS-3120-24TC:admin# create authen_login method_list_name login_list_1
Command: create authen_login method_list_name login_list_1
Success.
DGS-3120-24TC:admin#
5-7 config authen_login
Description
Configure a user-defined or default method list of authentication methods for user login. The
sequence of methods will effect the altercation result. For example, if the sequence is tacacs+ first,
then tacacs and local, when user trys to login, the authentication request will be sent to the first
server host in tacacs+ built-in server group. If the first server host in tacacs+ group is missing, the
authentication request will be sent to the second server host in tacacs+ group, and so on. If all
server hosts in tacacs+ group are missing, the authentication request will be sent to the first server
host in tacacs group...If all server hosts in tacacs group are missing, the local account database in
the device is used to authenticate this user. When user logins the device successfully while using
methods like tacacs/xtacacs/tacacs+/radius built-in or user-defined server groups or none, the
"user" privilege level is assigned only. If user wants to get admin privilege level, user must use the
"enable admin" command to promote his privilege level. But when local method is used, the
privilege level will depend on this account privilege level stored in the local device.
Format
config authen_login [default | method_list_name <string 15>] method {tacacs | xtacacs |
tacacs+ | radius | server_group <string 15> | local | none}
Parameters
default - The default method list of authentication methods.
method_list_name - The user-defined method list of authentication methods.
<string 15> - Enter the method list name here. This value can be up to 15 characters long.
method - Specify the authentication method used.
tacacs - (Optional) Authentication by the built-in server group "tacacs".
xtacacs - (Optional) Authentication by the built-in server group "xtacacs".
DGS-3120 Series Managed Switch CLI Reference Guide
68