D-Link DGS-3120-48PC Reference Manual page 281

®
xStack
DGS-3120-24TC:admin# config filter extensive_netbios 1-10 state enable
Command: config filter extensive_netbios 1-10 state enable
Success.
DGS-3120-24TC:admin#
29-4 show filter extensive_netbios
Description
This command is used to display the extensive netbios state on the Switch.
Format
show filter extensive_netbios
Parameters
None.
Restrictions
None.
Example
To display the extensive_state created on the Switch:
DGS-3120-24TC:admin# show filter extensive_netbios
Command: show filter extensive_netbios
Enabled ports: 1-3
DGS-3120-24TC:admin#
DGS-3120 Series Managed Switch CLI Reference Guide
277