®
xStack
DGS-3120-24TC:admin# show authorization
Command: show authorization
Authorization for Attributes: Enabled.
DGS-3120-24TC:admin#
16-10 config authentication server failover
Description
This command is used to configure authentication server failover function.
Format
config authentication server failover [local | permit | block]
Parameters
local - Use local DB to authenticate the client.
permit - The client is always regarded as authenticated.
block - Block the client (Default setting).
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
Set authentication server auth fail over state:
DGS-3120-24TC:admin# config authentication server failover local
Command: config authentication server failover local
Success.
DGS-3120-24TC:admin#
16-11 show authentication
Description
This command is used to display authentication global configuration.
Format
show authentication
Parameters
None.
DGS-3120 Series Managed Switch CLI Reference Guide
169