D-Link DGS-3120-48PC Reference Manual page 85

®
xStack
Format
show authen server_host
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all authentication server hosts:
DGS-3120-24TC:admin#show authen server_host
Command: show authen server_host
IP Address Protocol
--------------- --------
10.1.1.222 TACACS+
Total Entries : 1
DGS-3120-24TC:admin#
5-24 config authen parameter response_timeout
Description
This command is used to configure the amount of time waiting or user input on console, telnet,
SSH application.
Format
config authen parameter response_timeout <int 0-255>
Parameters
<int 0-255> - The amount of time for user input on console or telnet or SSH. 0 means there is no
time out. This value must be between 0 and 255. Default value is 30 seconds.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the amount of time waiting or user input to be 60 seconds:
DGS-3120 Series Managed Switch CLI Reference Guide
Port Timeout
----- -------
15555 10
Retransmit Key
---------- -------------------------
------ This is a secret.
81