D-Link DGS-3120-48PC Reference Manual page 671

®
xStack
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable SNMP authentication trap support:
DGS-3120-24TC:admin# disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DGS-3120-24TC:admin#
72-28 enable snmp linkchange_traps
Description
This command is used to configure the sending of linkchange traps.
Format
enable snmp linkchange_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable the sending of linkchange traps:
DGS-3120-24TC:admin# enable snmp linkchange_traps
Command: enable snmp linkchange_traps
Success.
DGS-3120-24TC:admin#
DGS-3120 Series Managed Switch CLI Reference Guide
667