D-Link DGS-3120-48PC Reference Manual page 217

®
xStack
DGS-3120-24TC:admin#create cpu access_profile profile_id 1 ethernet vlan
source_mac 00-00-00-00-00-01 destination_mac 00-00-00-00-00-02 802.1p
ethernet_type
Command: create cpu access_profile profile_id 1 ethernet vlan source_mac 00-00-
00-00-00-01 destination_mac 00-00-00-00-00-02 802.1p ethernet_type
Success.
DGS-3120-24TC:admin#create cpu access_profile profile_id 2 ip vlan
source_ip_mask 20.0.0.0 destination_ip_mask 10.0.0.0 dscp icmp type code
Command: create cpu access_profile profile_id 2 ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code
Success.
DGS-3120-24TC:admin#
21-2 delete cpu access_profile
Description
This command is used to delete CPU access list rules.
Format
delete cpu access_profile [profile_id <value 1-5> | all]
Parameters
profile_id - Specify the index of access list profile.
<value 1-5> - Enter the profile ID value here. This value must be between 1 and 5.
all – Specify that al the access list profiles will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete CPU access list rules:
DGS-3120-24TC:admin# delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DGS-3120-24TC:admin#
21-3 config cpu access_profile
Description
This command is used to configure CPU access list entry.
DGS-3120 Series Managed Switch CLI Reference Guide
213