D-Link DGS-3120-48PC Reference Manual page 715

®
xStack
Restrictions
Only Administrator-level users can issue this command.
Example
To download firmware from TFTP:
DGS-3120-24TC:admin# download firmware_fromTFTP 10.54.71.1 src_file px.had
Command: download firmware_fromTFTP 10.54.71.1 src_file px.had
Connecting to server................... Done.
Download firmware...................... Done.
Please wait, programming flash......... Done.
DGS-3120-24TC:admin#
To download configuration from TFTP:
DGS-3120-24TC:admin# download cfg_fromTFTP 10.54.71.1 src_file cfg01.txt
Command: download cfg_fromTFTP 10.54.71.1 src_file cfg01.txt
Connecting to server..................... Done.
Download configuration................. Done.
DGS-3120-24TC:admin#
79-2 upload
Description
This command is used to upload firmware and configuration from device to TFTP server.
Format
upload [cfg_toTFTP [<ipaddr> | <ipv6addr>] dest_file <path_filename 64> {unit <unit_id>}
{src_file <pathname>} {[include | exclude | begin] <filter_string 80> {<filter_string 80>
{<filter_string 80>}} {[include | exclude | begin] <filter_string 80> {<filter_string 80>
{<filter_string 80>}} {[include | exclude | begin ] <filter_string 80> {<filter_string 80>
{<filter_string 80>}}}}} | log_toTFTP [<ipaddr> | <ipv6addr>] dest_file <path_filename 64> |
attack_log_toTFTP [<ipaddr> | <ipv6addr>] dest_file <path_filename 64> {unit <unit_id>} |
firmware_toTFTP [<ipaddr> | <ipv6addr>] dest_file <path_filename 64> {unit <unit_id>}
{src_file <pathname>}]
Parameters
cfg_toTFTP – Specify that the configuration file will be uploaded to the TFTP server.
<ipaddr> - The IP address of the TFTP server.
<ipv6addr> - The IPv6 address of the TFTP server. (EI Mode Only)
dest_file - Used to identify the parameter "path_filename".
<path_filename 64> - The pathname specifies the pathname on the TFTP server. It can
be a relative pathname or an absolute pathname. This name can be up to 64 characters
long.
DGS-3120 Series Managed Switch CLI Reference Guide
711
Do not power off!