D-Link DGS-3120-48PC Reference Manual page 798

xStack
the maximum user limit on
whole device in 5 minutes
WAC
When a client host
authenticated successful.
When a client host fails to
authenticate.
The authorized user
number on whole device
reaches the max user
limit.
The authorized user
number on whole device
is below the max user
limit in a time
interval(interval is project
depended).
IMPB Unauthenticated IP
address encountered and
discarded by IP-MAC port
binding
Dynamic IMPB entry is
conflict with static ARP
Dynamic IMPB entry is
conflict with static FDB
Dynamic IMPB entry
conflicts with static IMPB
Creating IMPB entry failed
due to no ACL rule
available
IP and IP Address change
Password activity
Changed
Password change activity
®
DGS-3120 Series Managed Switch CLI Reference Guide
WAC authenticated user
(Username: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>,
Port: <[unitID:] portNum>)
WAC unauthenticated user (User
Name: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>,
Port: <[unitID:]portNum>)
WAC enters stop learning state.
WAC recovers from stop learning
state.
Unauthenticated IP-MAC address
and discarded by IMPB (IP:
<ipaddr>, MAC: <macaddr>, Port
<[unitID:]portNum>)
Dynamic IMPB entry conflicts with
static ARP(IP: <ipaddr>, MAC:
<macaddr>, Port
<[unitID:]portNum>)
Dynamic IMPB entry conflicts with
static FDB(IP: <ipaddr>, MAC:
<macaddr>, Port
<[unitID:]portNum>)
Dynamic IMPB entry conflicts with
static IMPB(IP: <ipaddr>, MAC:
<macaddr>, Port
<[unitID:]portNum>)
Creating IMPB entry failed due to
no ACL rule being
available(IP:<ipaddr>, MAC:
<macaddr>, Port
<[unitID:]portNum>)
[Unit <unitID>,] Management IP
address was changed by
console(Username:
<username>,IP:<ipaddr>)
[Unit <unitID>,] Password was
changed by console (Username:
<username>,IP:<ipaddr> )
Informational
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Informational
Informational
794
per system
per system
"console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
"console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.