®
xStack
DGS-3120-24TC:admin# config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DGS-3120-24TC:admin#
5-25
config authen parameter attempt
Description
This command is used to configure the maximum attempts for user's trying to login or promote the
privilege on console, telnet, SSH application.
Format
config authen parameter attempt <int 1-255>
Parameters
<int 1-255> - The amount of attempts for user's trying to login or promote the privilege on console
or telnet or SSH. This value must be between 1 and 255. Default value is 3.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the maximum attempts for user's trying to login or promote the privilege to be 9:
DGS-3120-24TC:admin# config authen parameter attempt 9
Command: config authen parameter attempt 9
Success.
DGS-3120-24TC:admin#
5-26
show authen parameter
Description
This command is used to display the parameters of authentication.
Format
show authen parameter
Parameters
None.
DGS-3120 Series Managed Switch CLI Reference Guide
82