D-Link DGS-3120-48PC Reference Manual page 500

®
xStack
49-11 delete [igmp_snooping | mld_snooping] multicast_vlan
Description
This command is used to delete an IGMP or MLD snooping multicast VLAN.
Format
delete [igmp_snooping | mld_snooping] multicast_vlan <vlan_name 32>
Parameters
igmp_snooping - Specify that an IGMP snooping multicast VLAN will be deleted.
mld_snooping - Specify that an MLD snooping multicast VLAN will be deleted.
multicast_vlan - The name of the multicast VLAN to be deleted.
<vlan_name 32> -Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an MLD snooping multicast VLAN called "v1":
DGS-3120-24TC:admin#
Command: delete mld_snooping multicat_vlan v1
Success.
DGS-3120-24TC:admin#
49-12 enable [igmp_snooping | mld_snooping] multicast_vlan
Description
This command is used to control the status of the multicast VLAN function. The command disable
igmp_snooping controls the ordinary IGMP snooping function. The command disable
mld_snooping controls the status of the ordinary MLD snooping function. By default, the multicast
VLAN function is disabled.
Format
enable [igmp_snooping | mld_snooping] multicast_vlan
Parameters
igmp_snooping - Specify that IGMP snooping multicast VLAN is to be enabled.
mld_snooping - Specify that MLD snooping multicast VLAN is to be enabled.
DGS-3120 Series Managed Switch CLI Reference Guide
delete mld_snooping multicat_vlan v1
496