D-Link DGS-3120-48PC Reference Manual page 498

Layer 2 managed stackable gigabit switch
Hide thumbs Also See for DGS-3120-48PC:
Table of Contents

Advertisement

®
xStack
DGS-3120-24TC:admin# show igmp_snooping multicast_vlan_group_profile
Command: show igmp_snooping multicast_vlan_group_profile
Profile Name
---------------------
MOD
Customer
Total Entries : 2
DGS-3120-24TC:admin#
49-9
config [igmp_snooping | mld_snooping]
multicast_vlan_group
Description
This command is used to configure the multicast group learned with the specific multicast VLAN.
The following two cases can be considered for examples:
Case 1- The multicast group is not configured, multicast VLANs do not have any member ports
overlapping and the join packet received by the member port is learned on only the multicast
VLAN that this port is a member of.
Case 2-,The join packet is learned with the multicast VLAN that contains the destination multicast
group. If the destination multicast group of the join packet cannot be classified into any multicast
VLAN to which this port belongs, then the join packet will be learned on the natural VLAN of the
packet.
Note that a profile cannot overlap in different multicast VLANs. Multiple profiles can be added to a
multicast VLAN.
Format
config [igmp_snooping | mld_snooping] multicast_vlan_group <vlan_name 32> [add |
delete] profile_name <profile_name 1-32>
Parameters
igmp_snooping - Specify IGMP snooping should be configured.
mld_snooping - Specify MLD snooping should be configured.
multicast_vlan_group - The name of the multicast VLAN to be configured. Each multicast VLAN
is given a name of up to 32 characters.
<vlan_name 32> - Enter the multicast VLAN name here. The VLAN name can be up to 32
characters long.
add - Used to associate a profile to a multicast VLAN.
delete - Used to de-associate a profile from a multicast VLAN.
profile_name - Specify the multicast VLAN profile name.
<profile_name 1-32> - Enter the multicast VLAN profile name here. The name can be up to
32 characters long.
DGS-3120 Series Managed Switch CLI Reference Guide
Multicast Addresses
--------------------------------
234.1.1.1 - 238.244.244.244
239.1.1.1 - 239.2.2.2
224.19.62.34 - 224.19.162.200
494

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3120 series

Table of Contents