D-Link DGS-3120-48PC Reference Manual page 693

®
xStack
DGS-3120-24TC:admin# config stacking force_master_role state enable
Command: config stacking force_master_role state enable
Success.
DGS-3120-24TC:admin#
74-8 config stacking trap state
Description
This command is used to configure trap state for stacking.
Format
config stacking trap state [enable | disable]
Parameters
enable - Enable the Switch's stacking trap.
disable - Disable the Switch's stacking trap.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the stacking trap state:
DGS-3120-24TC:admin#config stacking trap state enable
Command: config stacking trap state enable
Success.
DGS-3120-24TC:admin#
74-9 config stacking log state
Description
This command is used to configure log state for stacking.
Format
config stacking log state [enable | disable]
Parameters
enable - Enable the Switch's stacking log.
disable - Disable the Switch's stacking log.
DGS-3120 Series Managed Switch CLI Reference Guide
689