D-Link DGS-3120-48PC Reference Manual page 79

®
xStack
DGS-3120-24TC:admin# show authen application
Command: show authen application
Application Login Method List
----------- -----------------
Console
Telnet
SSH
HTTP
DGS-3120-24TC:admin#
5-16 create authen server_group
Description
This command is used to create a user-defined authentication server group. The maximum
supported number of server groups including built-in server groups is 8. Each group consists of 8
server hosts as maximum.
Format
create authen server_group <string 15>
Parameters
<string 15> - The user-defined server group name. This value can be up to 15 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To create a user-defined authentication server group:
DGS-3120-24TC:admin# create authen server_group mix_1
Command: create authen server_group mix_1
Success.
DGS-3120-24TC:admin#
5-17 config authen server_group
Description
This command is used to add or remove an authentication server host to or from the specified
server group. Built-in server group "tacacs", "xtacacs", "tacacs+", "radius" accepts the server host
with the same protocol only, but user-defined server group can accept server hosts with different
protocols.
DGS-3120 Series Managed Switch CLI Reference Guide
Enable Method List
------------------
default
login_list_1
default
default
default
default
default
default
75