D-Link DGS-3120-48PC Reference Manual page 265

®
xStack
state - Enable or disable the DHCPv6 relay state of the interface.
enable - Enable the DHCPv6 relay state of the interface.
disable - Disable the DHCPv6 relay state of the interface.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the DHCPv6 relay state of the System interface to enable:
DGS-3120-24TC:admin# config dhcpv6_relay ipif System state enable
Command: config dhcpv6_relay ipif System state enable
Success.
DGS-3120-24TC:admin#
26-6 show dhcpv6_relay
Description
This command is used to display the current DHCPv6 relay configuration of the specified or all IP
Interfaces.
Format
show dhcpv6_relay {ipif <ipif_name 12>}
Parameters
ipif - (Optional) The IP information for DHCPv6 relay.
<ipif_name 12> - The name of the IP interface in which DHCPv6 relay is to be enabled.
Restrictions
None.
Example
To show the DHCPv6 relay configuration of all interfaces:
DGS-3120 Series Managed Switch CLI Reference Guide
261