D-Link DGS-3120-48PC Reference Manual page 460

®
xStack
To delete the MAC-based Access Control local database entry for the VLAN name VLAN3:
DGS-3120-24TC:admin# delete mac_based_access_control_local vlan VLAN3
Command: delete mac_based_access_control_local vlan VLAN3
Success.
DGS-3120-24TC:admin#
44-13 config mac_based_access_control authorization attributes
Description
This command is used to enable or disable the acceptation of an authorized configuration.
When authorization is enabled for MAC-based Access Controls with RADIUS authentication, the
authorized attributes (for example VLAN, 802.1p default priority, and ACL) assigned by the
RADUIS server will be accepted if the global authorization status is enabled.
When authorization is enabled for MAC-based Access Controls with local authentication, the
authorized attributes assigned by the local database will be accepted.
Format
config mac_based_access_control authorization attributes {radius [enable | disable] | local
[enable | disable]}(1)
Parameters
radius - (Optional) If specified to enable, the authorized attributes (for example VLAN, 802.1p
default priority, and ACL) assigned by the RADUIS server will be accepted if the global
authorization status is enabled. The default state is enabled.
enable - Specify that the radius attributes will be enabled.
disable - Specify that the radius attributes will be disabled.
local - (Optional) If specified to enable, the authorized attributes assigned by the local database
will be accepted if the global authorization status is enabled. The default state is enabled.
enable - Specify that the local attributes will be enabled.
disable - Specify that the local attributes will be disabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
The following example will disable the configuration authorized from the local database:
DGS-3120 Series Managed Switch CLI Reference Guide
456