D-Link DGS-3120-48PC Reference Manual page 352

®
xStack
DGS-3120-24TC:admin#
Command: config mld_snooping ports 1 rate_limit 100
Success.
DGS-3120-24TC:admin#
33-44 show mld_snooping rate_limit
Description
This command is used to configure the rate limit of MLD control packets that are allowed by each
port.
Format
show mld_snooping rate_limit [ports <portlist> | vlanid <vlanid_list>]
Parameters
ports - Specify a list of ports.
<portlist> - Enter the range of ports to be configured here.
vlanid - Specify a list of VLANs.
<vlanid_list> - Enter the VLAN ID list here.
Restrictions
None.
Example
To configure the mld_snooping per port rate_limit:
DGS-3120-24TC:admin#
Command: show mld_snooping rate_limit ports 1-15
Port Rate Limit
-------- -----------
1 No Limit
2 100
3 No Limit
4 No Limit
5 No Limit
Total Entries: 5
DGS-3120-24TC:admin#
DGS-3120 Series Managed Switch CLI Reference Guide
config mld_snooping ports 1 rate_limit 100
show mld_snooping rate_limit ports 1-15
348