Appendix C System Log Entries - D-Link DGS-3120-48PC Reference Manual

xStack
Appendix C
The following table lists all possible entries and their corresponding meanings that will appear in
the System Log of this Switch.
Category Event Description
System System started up
System warm start
System cold start
Configuration saved to
flash
System log saved to flash
Configuration and log
saved to flash
Internal Power failed
Internal Power is
recovered
Redundant Power failed
Redundant Power is
working
Side Fan failed
Side Fan recovered
up/down- Firmware upgraded
load successfully
®
DGS-3120 Series Managed Switch CLI Reference Guide
System Log Entries
Log Information
[Unit <unitID>,] System started up
[Unit <unitID>,] System warm start
[Unit <unitID>,] System cold start
[Unit <unitID>,] Configuration
saved to flash by
console(Username: <username>,
IP: <ipaddr> )
[Unit <unitID>,] System log saved
to flash by console(Username:
<username>, IP: <ipaddr> )
[Unit <unitID>,] Configuration and
log saved to flash by
console(Username: <username>,
IP: <ipaddr> )
[Unit <unitID>,] Internal Power
failed
[Unit <unitID>,] Internal Power is
recovered
[Unit <unitID>,] Redundant Power
failed
[Unit <unitID>,] Redundant Power
is working
[Unit <unitID>,] Side Fan failed
[Unit <unitID>,]Side Fan recovered
[Unit <unitID>,] Firmware
upgraded by console successfully
(Username: <username>, IP:
Severity
Critical
Critical
Critical
Informational
Informational
Informational
Critical
Critical
Critical
Critical
Critical
Critical
Informational
783
Remark
"by console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
"by console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
"by console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
"by console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user