Disable Stp; Config Stp - D-Link DGS-3120-48PC Reference Manual

®
xStack
DGS-3120-24TC:admin#
Command: enable stp
Success.
DGS-3120-24TC:admin#
50-2

disable stp

Description
This command is used to disable STP globally.
Format
disable stp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable STP:
DGS-3120-24TC:admin#
Command: disable stp
Success.
DGS-3120-24TC:admin#
50-3

config stp

Description
This command is used to configure the bridge parameters global settings.
Format
config stp {maxage <value 6-40> | maxhops <value 6-40> | hellotime <value 1-2> |
forwarddelay <value 4-30> | txholdcount <value 1-10> | fbpdu [enable | disable] |
nni_bpdu_addr [dot1d | dot1ad]}
Parameters
maxage - (Optional) Used to determine if a BPDU is valid. The default value is 20.
DGS-3120 Series Managed Switch CLI Reference Guide
enable stp
disable stp
501