D-Link DGS-3120-48PC Reference Manual page 154

®
xStack
processing will be disabled. By enable this automatic configuration, the link local address will be
automatically configured and IPv6 processing will be started.
Format
enable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Parameters
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
long.
all - Specify that all the IP interfaces will be used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the IP interface for IPv6 link local automatic:
DGS-3120-24TC:admin#enable ipif_ipv6_link_local_auto newone
Command: enable ipif_ipv6_link_local_auto newone
Success.
DGS-3120-24TC:admin#
12-20 disable ipif_ipv6_link_local_auto (EI Mode Only)
Description
This command is used to disable the auto configuration of link local address when no IPv6 address
are configured.
Format
disable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Parameters
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
long.
all - Specify that all the IP interfaces will be used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the IP interface for IPv6 link local automatic:
DGS-3120 Series Managed Switch CLI Reference Guide
150