D-Link DGS-3120-48PC Reference Manual page 389

®
xStack
state.
infinite - Specify to indicate the idle state of the authenticated host on the port will never be
checked. The default value is infinite.
<min 1-1440> - Specify an idle time between 1 and 1440 minutes.
block_time - If a host fails to pass the authentication, it will be blocked for a period specified by
the blocking time.The default value is 60 seconds.
<sec 0-300> - Specify a blocking time value between 0 and 300.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the JWAC port state:
DGS-3120-24TC:admin# config jwac ports 1-9 state enable
Command: config jwac ports 1-9 state enable
Success.
DGS-3120-24TC:admin#
37-19 show jwac ports
Description
This command is used to display the port configuration of JWAC.
Format
show jwac ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a port range to show the configuration of JWAC.
Restrictions
None.
Example
To display JWAC ports 1 to 4:
DGS-3120 Series Managed Switch CLI Reference Guide
385