Create Vlan Vlanid - D-Link DGS-3120-48PC Reference Manual

®
xStack
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a VLAN with name "v2" and VLAN ID 2:
DGS-3120-24TC:admin# create vlan v2 tag 2 type 1q_vlan advertisement
Command: create vlan v2 tag 2 type 1q_vlan advertisement
Success.
DGS-3120-24TC:admin#
3-2

create vlan vlanid

Description
This command is used to create more than one VLANs at a time. A unique VLAN name (e.g.
VLAN10) will be automatically assigned by the system. The automatic assignment of VLAN name
is based on the following rule: "VLAN"+ID. For example, for VLAN ID 100, the VLAN name will be
VLAN100. If this VLAN name is conflict with the name of an existing VLAN, then it will be renamed
based on the following rule: "VLAN"+ID+"ALT"+ collision count. For example, if this conflict is the
second collision, then the name will be VLAN100ALT2.
Format
create vlan vlanid <vidlist> {type [1q_vlan | private_vlan]} {advertisement}
Parameters
vlanid - The VLAN ID list to be created.
<vidlist> - Enter the VLAN ID list here.
type - (Optional) Specify the type of VLAN to be created.
1q_vlan - (Optional) Specify that the VLAN created will be a 1Q VLAN.
private_vlan – (Optional) Specify that the private VLAN type will be used.
advertisement - (Optional) Specify the VLAN as being able to be advertised out.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create some VLANs using VLAN ID:
DGS-3120-24TC:admin# create vlan vlanid 10-30
Command: create vlan vlanid 10-30
Success.
DGS-3120-24TC:admin#
DGS-3120 Series Managed Switch CLI Reference Guide
24