D-Link DGS-3120-48PC Reference Manual page 796

xStack
server
Enable Admin failed
through Telnet due to
AAA server timeout or
improper configuration
Successful Enable Admin
through SSH
authenticated by AAA
server
Enable Admin failed
through SSH
authenticated by AAA
server
Enable Admin failed
through SSH due to AAA
server timeout or
improper configuration
Port port security is exceeded
Security to its maximum learning
size and will not learn any
new address
RADIUS VID assigned from
RADIUS server after
RADIUS client is
authenticated by RADIUS
server successfully .This
VID will be assigned to
the port and this port will
be the VLAN untagged
port member.
Ingress bandwidth
assigned from RADIUS
server after RADIUS
client is authenticated by
RADIUS server
successfully .This Ingress
bandwidth will be
assigned to the port.
Egress bandwidth
assigned from RADIUS
server after RADIUS
client is authenticated by
RADIUS server
successfully .This egress
bandwidth will be
assigned to the port.
802.1p default priority
assigned from RADIUS
server after RADIUS
client is authenticated by
RADIUS server
successfully. This 802.1p
default priority will be
assigned to the port.
Failed to assign ACL
profiles/rules from
®
DGS-3120 Series Managed Switch CLI Reference Guide
<serverIP> (Username:
<username> )
Enable Admin failed through
Telnet from <userIP> due to AAA
server timeout or improper
configuration (Username:
<username>)
Successful Enable Admin through
SSH from <userIP> authenticated
by AAA server <serverIP>
(Username: <username> )
Enable Admin failed through SSH
from <userIP> authenticated by
AAA server <serverIP>
(Username: <username> )
Enable Admin failed through SSH
from <userIP> due to AAA server
timeout or improper configuration
(Username: <username> )
Port security violation (MAC
address: <macaddr> on port:
<[unitID:]portNum>)
RADIUS server <ipaddr>
assigned VID :<vlanID> to port
<[unitID:]portNum>
(account :<username> )
RADIUS server <ipaddr>
assigned ingress
bandwith :<ingressBandwidth> to
port <[unitID:]portNum> (account :
<username>)
RADIUS server <ipaddr>
assigned egress
bandwith :<egressBandwidth> to
port <[unitID:]portNum> (account:
<username>)
RADIUS server <ipaddr>
assigned 802.1p default
priority:<priority> to port
<[unitID:]portNum> (account :
<username>)
RADIUS server <ipaddr> assigns
<username> ACL failure at port
Warning
Informational
Warning
Warning
Warning
Informational
Informational
Informational
Informational
Warning
792