D-Link DGS-3120-48PC Reference Manual page 640

®
xStack
Example
To show the sFlow information:
DGS-3120-24TC:admin#show sflow
Command: show sflow
sFlow Version : V5
sFlow Address : 10.90.90.90
sFlow State : Disabled
DGS-3120-24TC:admin#
69-13 show sflow flow_sampler
Description
This command is used to show the sFlow flow sampler configured for ports. The actual value rate
is 256 times the displayed rate value. There are two types of rates. The Configured Rate is
configured by the user. In order to limit the number of packets sent to the CPU when the rate of
traffic to the CPU is high, the sampling rate will be decreased. This is specified as the active rate.
Format
show sflow flow_sampler
Parameters
None.
Restrictions
None.
Example
To show the sFlow flow sampler information of ports which have been created:
DGS-3120-24TC:admin#show sflow flow_sampler
Command: show sflow flow_sampler
Port Analyzer Server ID
---- ------------------
1:1 1
Total Entries: 1
DGS-3120-24TC:admin#
DGS-3120 Series Managed Switch CLI Reference Guide
Configured Rate
---------------
0
636
Active Rate Max Header Size
----------- ---------------
0 18