D-Link DGS-3120-48PC Reference Manual page 447

®
xStack
43-4 config mac_notification ports
Description
This command is used to configure the port's MAC address table notification status settings.
Format
config mac_notification ports [<portlist> | all] [enable | disable]
Parameters
<portlist> - Enter a list of ports used for the configuration here.
all - Specify that all the ports will be used for this configuration.
enable - Enable the port's MAC address table notification.
disable - Disable the port's MAC address table notification.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable 7th port's mac address table notification:
DGS-3120-24TC:admin# config mac_notification ports 1:7 enable
Command: config mac_notification ports 1:7 enable
Success.
DGS-3120-24TC:admin#
43-5 show mac_notification
Description
This command is used to display the Switch's Mac address table notification global settings.
Format
show mac_notification
Parameters
None.
Restrictions
None.
DGS-3120 Series Managed Switch CLI Reference Guide
443