Appendix Eradius Attributes Assignment - D-Link DGS-3120-48PC Reference Manual

xStack
Appendix E
The RADIUS Attributes Assignment on the Switch is used in the following modules: 802.1X (Port-
based and Host-based), MAC-based Access Control, Web-based Access Control (WAC) and
Japanese Web-based Access Control (JWAC).
The description that follows explains the following RADIUS Attributes Assignment types:
•
Ingress/Egress Bandwidth
•
802.1p Default Priority
•
VLAN
•
ACL
To assign Ingress/Egress bandwidth by RADIUS Server, the proper parameters should be
configured on the RADIUS Server. The tables below show the parameters for bandwidth.
The parameters of the Vendor-Specific attributes are:
Vendor-Specific Attribute
Vendor-ID
Vendor-Type
Attribute-Specific Field
If the user has configured the bandwidth attribute of the RADIUS server (for example, ingress
bandwidth 1000Kbps) and the 802.1X authentication is successful, the device will assign the
bandwidth (according to the RADIUS server) to the port. However, if the user does not configure
the bandwidth attribute and authenticates successfully, the device will not assign any bandwidth to
the port. If the bandwidth attribute is configured on the RADIUS server with a value of "0" or more,
than the effective bandwidth (100Mbps on an Ethernet port or 1Gbps on a Gigabit port) of the port
will be set to no_limited.
To assign 802.1p default priority by RADIUS Server, the proper parameters should be
configured on the RADIUS Server. The tables below show the parameters for 802.1p default
priority.
®
DGS-3120 Series Managed Switch CLI Reference Guide
RADIUS Attributes
Assignment
Description
Defines the vendor.
Defines the attribute.
Used to assign the bandwidth
of a port.
Value
171 (DLINK)
2 (for ingress bandwidth)
3 (for egress bandwidth)
Unit (Kbits)
806
Usage
Required
Required
Required