D-Link DGS-3120-48PC Reference Manual page 248

®
xStack
Parameters
ipif - (Optional) Specify the IP interface name.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
If no parameter is specified , the system will display all DHCP relay configuration.
Restrictions
None.
Example
To display DHCP relay configuration: (EI Mode Only)
DGS-3120-24TC:admin#show dhcp_relay ipif System
Command: show dhcp_relay ipif System
DHCP/BOOTP Relay Status
DHCP/BOOTP Hops Count Limit
DHCP/BOOTP Relay Time Threshold : 0
DHCP Vendor Class Identifier Option 60 State: Disabled
DHCP Client Identifier Option 61 State: Disabled
DHCP Relay Agent Information Option 82 State
DHCP Relay Agent Information Option 82 Check
DHCP Relay Agent Information Option 82 Policy : Replace
DHCP Relay Agent Information Option 82 Remote ID : 00-01-02-03-04-00
Interface Server 1
------------ --------------- --------------- --------------- ---------------
System 10.90.90.100
DGS-3120-24TC:admin#
To display DHCP relay configuration: (SI Mode Only)
DGS-3120 Series Managed Switch CLI Reference Guide
: Disabled
: 4
Server 2
244
: Disabled
: Disabled
Server 3 Server 4