Chapter 23 Dhcp Local Relay Command List - D-Link DGS-3120-48PC Reference Manual

xStack
Chapter 23
config dhcp_local_relay vlan <vlan_name 32> state [enable | disable]
config dhcp_local_relay vlan vlanid <vlan_id> state [enable | disable]
enable dhcp_local_relay
disable dhcp_local_relay
show dhcp_local_relay
23-1 config dhcp_local_relay vlan
Description
This command is used to enable or disable DHCP local relay function for specified VLAN name.
When DHCP local relay is enabled for the VLAN, the DHCP packet will be relayed in broadcast
way without change of the source MAC address and gateway address. DHCP option 82 will be
automatically added.
Format
config dhcp_local_relay vlan <vlan_name 32> state [enable | disable]
Parameters
<vlan_name 32> - Specify the VLAN name that the DHCP local relay function will be enabled.
This name can be up to 32 characters long.
state - Enable or disable DHCP local relay for specified vlan.
enable - Specify that the DHCP local relay function will be enabled.
disable - Specify that the DHCP local relay function will be disabled.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable DHCP local relay for default VLAN:
DGS-3120-24TC:admin# config dhcp_local_relay vlan default state enable
Command: config dhcp_local_relay vlan default state enable
Success.
DGS-3120-24TC:admin#
®
DGS-3120 Series Managed Switch CLI Reference Guide
DHCP Local Relay
Command List
233