D-Link DGS-3120-48PC Reference Manual page 13

®
xStack
DGS-3120-24TC:admin#show session
Command: show session
ID Live Time
--- ------------ --------------------------------------- ----- ---------------
8 00:04:17.870 Serial Port
Total Entries: 1
CTRL+C ESC q Quit
2-2 show serial_port
Description
This command is used to display the current serial port settings.
Format
show serial_port
Parameters
None.
Restrictions
None.
Example
To display the serial port setting:
DGS-3120-24TC:admin# show serial_port
Command: show serial_port
Baud Rate :
Data Bits :
Parity Bits :
Stop Bits :
Auto-Logout :
DGS-3120-24TC:admin#
2-3 config serial_port
Description
This command is used to configure the serial bit rate that will be used to communicate with the
management host and the auto logout time for idle connections.
DGS-3120 Series Managed Switch CLI Reference Guide
From
SPACE n Next Page p
9600
8
None
1
10 minutes
Previous Page r Refresh
9
Level User
admin Anonymous