D-Link DGS-3120-48PC Reference Manual page 169

®
xStack
specified, or all VLANs is disabled, means do not care which VLAN the client comes
from, the client will be authenticated if the client's MAC(not care the VLAN) is not
authenticated. After the client is authenticated, the client will not be re-authenticated
when received from other VLANs. All VLANs are disabled by default.
Note: When port's authorization mode is changed to port-based, previously authentication
VLAN(s) on this port will be clear.
multi_authen_methods - (Optional) Specify the method for compound authentication. (EI Mode
Only)
none - Compound authentication is not enabled.
any - If any one of the authentication method (802.1X, MAC-based Access Control, and WAC)
passes, then pass.
dot1x_impb - Dot1x will be verified first, and then IMPB will be verified. Both authentication
need to be passed.
impb_jwac - JWAC will be verified first, and then IMPB will be verified. Both authentication
need to be passed.
impb_wac - WAC will be verified first, and then IMPB will be verified. Both authentication
need to be passed.
mac_impb - MAC-AC will be verified first, and then IMPB will be verified. Both authentication
need to be passed.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
The following example sets the compound authentication method of all ports to any:
DGS-3120-24TC:admin# config authentication ports all multi_authen_methods any
Command: config authentication ports all multi_authen_methods any
Success.
DGS-3120-24TC:admin#
16-5 show authentication guest_vlan (EI Mode Only)
Description
This command is used to show guest VLAN setting.
Format
show authentication guest_vlan
Parameters
None.
Restrictions
None.
DGS-3120 Series Managed Switch CLI Reference Guide
165