Config Gvrp - D-Link DGS-3120-48PC Reference Manual

®
xStack
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the auto-assign PVID:
DGS-3120-24TC:admin# disable pvid auto_assign
Command: disable pvid auto_assign
Success.
DGS-3120-24TC:admin#
3-14 show pvid auto_assign
Description
This command is used to display the PVID auto-assignment state.
Format
show pvid auto_assign
Parameters
None.
Restrictions
None.
Example
To display PVID auto-assignment state:
DGS-3120-24TC:admin#show pvid auto_assign
Command: show pvid auto_assign
PVID Auto-assignment: Enabled
DGS-3120-24TC:admin#
3-15

config gvrp

Description
The config gvrp timer command set the GVRP timer's value. The default value for Join time is 200
milliseconds; for Leave time is 600 milliseconds; for LeaveAll time is 10000 milliseconds.
DGS-3120 Series Managed Switch CLI Reference Guide
33