®
xStack
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the password recovery mode:
DGS-3120-24TC:admin# disable password_recovery
Command: disable password_recovery
Success.
DGS-3120-24TC:admin#
89-3
show password_recovery
Description
This command is used to display the password recovery state.
Format
show password_recovery
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the password recovery state:
DGS-3120-24TC:admin# show password_recovery
Command: show password_recovery
Running Configuration
NV-RAM Configuration
DGS-3120-24TC:admin#
DGS-3120 Series Managed Switch CLI Reference Guide
: Enabled
: Enabled
773