Chapter 52 Network Monitoring Command List - D-Link DGS-3120-48PC Reference Manual

xStack
Chapter 52
show packet ports <portlist>
show error ports <portlist>
show utilization [cpu | ports]
show utilization dram {unit <unit_id>}
show utilization flash {unit <unit_id>}
clear counters {ports <portlist>}
52-1 show packet ports
Description
This command is used to display statistics about the packets sent and received by the Switch.
Format
show packet ports <portlist>
Parameters
<portlist> - Specify a range of ports to be displayed.
Restrictions
None.
Example
To display the packets analysis for port 7 of the unit 1:
®
DGS-3120 Series Managed Switch CLI Reference Guide
Network Monitoring
Command List
519