D-Link DGS-3120-48PC Reference Manual page 686

®
xStack
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To upload configuration:
DGS-3120-24TC:admin# upload sim_ms configuration_to_tftp 10.55.47.1
D:\configuration.txt members 1
Command: upload sim_ms configuration_to_tftp 10.55.47.1 D:\configuration.txt
members 1
This device is uploading configuration.
Upload Status :
ID MAC Address
--- ----------------- ----------------
1 00-1A-2D-00-12-12 Success
DGS-3120-24TC:admin#
73-9 config sim trap
Description
This command is used to control sending of traps issued from the member switch.
Format
config sim trap [enable | disable]
Parameters
enable - Enable the trap state.
disable - Disable the trap state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable sim trap:
DGS-3120-24TC:admin# config sim trap enable
Command: config sim trap enable
Success.
DGS-3120-24TC:admin#
DGS-3120 Series Managed Switch CLI Reference Guide
Result
682
Please wait several minutes ...