Show Sntp; Enable Sntp - D-Link DGS-3120-48PC Reference Manual

®
xStack
DGS-3120-24TC:admin# config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-
interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DGS-3120-24TC:admin#
80-2

show sntp

Description
This command is used to display SNTP current time source and configuration.
Format
show sntp
Parameters
None.
Restrictions
None.
Example
To show SNTP:
DGS-3120-24TC:admin# show sntp
Command: show sntp
Current Time Scource
SNTP
SNTP Primary Server
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval
DGS-3120-24TC:admin#
80-3

enable sntp

Description
This command is used to turn on SNTP support.
Format
enable sntp
DGS-3120 Series Managed Switch CLI Reference Guide
: System Clock
: Disabled
: 10.1.1.1
: 30 sec
716