D-Link DGS-3120-48PC Reference Manual page 231

®
xStack DGS-3120 Series Managed Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enabled the DHCPv6 client debug function:
DGS-3120-24TC:admin#debug dhcpv6_client state enable
Command: debug dhcpv6_client state enable
Success.
DGS-3120-24TC:admin#
22-8 debug dhcpv6_client state disable (EI Mode Only)
Description
This command is used to disable the DHCPv6 client debug function.
Format
debug dhcpv6_client state disable
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disabled the DHCPv6 client debug function:
DGS-3120-24TC:admin#debug dhcpv6_client state disable
Command: debug dhcpv6_client state disable
Success.
DGS-3120-24TC:admin#
227