D-Link DGS-3120-48PC Reference Manual page 508

®
xStack
DGS-3120-24TC:admin#
Command: create stp instance_id 2
Success.
DGS-3120-24TC:admin#
50-6 config stp instance_id
Description
This command is used to map or remove the VLAN range of the specified MST instance for the
existed MST instances.
Format
config stp instance_id <value 1-15> [add_vlan | remove_vlan] <vidlist>
Parameters
instance_id - Specify the MSTP instance ID. Instance 0 represents for default instance, CIST.
<value 1-15> - Enter the MSTP instance ID here. This value must be between 1 and 15.
add_vlan - Specify to map the specified VLAN list to an existing MST instance.
remove_vlan - Specify to delete the specified VLAN list from an existing MST instance.
<vidlist> - Specify a list of VLANs by VLAN ID.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To map a VLAN ID to an MSTP instance:
DGS-3120-24TC:admin#
Command: config stp instance_id 2 add_vlan 1-3
Success.
DGS-3120-24TC:admin#
To remove a VLAN ID from an MSTP instance:
DGS-3120-24TC:admin#
Command: config stp instance_id 2 remove_vlan 2
Success.
DGS-3120-24TC:admin#
DGS-3120 Series Managed Switch CLI Reference Guide
create stp instance_id 2
config stp instance_id 2 add_vlan 1-3
config stp instance_id 2 remove_vlan 2
504