D-Link DGS-3120-48PC Reference Manual page 696

®
xStack
DGS-3120-24TC:admin# config syslog source_ipif none
Command: config syslog source_ipif none
Success
DGS-3120-24TC:admin#
75-2 show syslog source_ipif
Description
This command is used to display the syslog source IP interface.
Format
show syslog source_ipif
Parameters
None.
Restrictions
None.
Example
Show syslog source IP interface:
DGS-3120-24TC:admin#show syslog source_ipif
Command: show syslog source_ipif
Syslog Source IP Interface Configuration:
IP Interface
IPv4 Address
IPv6 Address
DGS-3120-24TC:admin#
75-3 config trap source_ipif
Description
This command is used to configure trap source IP interface.
Format
config trap source_ipif [<ipif_name 12> {<ipaddr> | <ipv6addr> } | none]
DGS-3120 Series Managed Switch CLI Reference Guide
: ipif3
: 14.0.0.5
: None
692