D-Link DGS-3120-48PC Reference Manual page 518

®
xStack
51-2 config nlb unicast_fdb
Description
This command is used to add or delete the forwarding ports for the specified NLB unicast FDB
entry.
Format
config nlb unicast_fdb [<vlan_name 32> | vlanid <vlanid>] <macaddr> [add | delete]
<portlist>
Parameters
<vlan_name 32> - Specify the VLAN name of the NLB unicast FDB entry to be configured.
vlanid - Specify the VLAN ID of the NLB unicast FDB entry to be configured.
<vlanid> - Enter the ID of the VLAN.
<macaddr> - Specify the MAC address of the NLB unicast FDB entry to be configured.
add - Specify to add the ports.
delete - Specify to delete the ports.
<portlist> - Specify a list of forwarding ports to be added or removed.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure NLB unicast FDB entry, for the product that support the VLAN information on the
unicast forwarding:
DGS-3120-24TC:admin#config nlb unicast_fdb vlanid 1 02-bf-01-01-01-01 add 1:1-
1:5
Command: config nlb unicast_fdb vlanid 1 02-BF-01-01-01-01 add 1:1-1:5
Success.
DGS-3120-24TC:admin#
51-3 delete nlb unicast_fdb
Description
This command is used to delete the NLB unicast FDB entry.
Format
delete nlb unicast_fdb [<vlan_name 32> | vlanid <vlanid>] <macaddr>
Parameters
<vlan_name 32> - Specify the VLAN name of the NLB unicast FDB entry to be deleted.
vlanid - Specify the VLAN ID of the NLB unicast FDB entry to be deleted.
DGS-3120 Series Managed Switch CLI Reference Guide
514