D-Link DGS-3120-48PC Reference Manual page 232

®
xStack
22-9 debug dhcpv6_client output (EI Mode Only)
Description
This command is used to set debug message to output to buffer or console.
Format
debug dhcpv6_client output [buffer | console]
Parameters
buffer - Let the debug message output to buffer.
console - Let the debug message output to console.
Restrictions
Only Administrator-level users can issue this command.
Example
To set debug information to output to console:
DGS-3120-24TC:admin#debug dhcpv6_client output console
Command: debug dhcpv6_client output console
Success.
DGS-3120-24TC:admin#
22-10 debug dhcpv6_client packet (EI Mode Only)
Description
This command is used to enable or disable debug information flag for DHCPv6 client packet,
including packet receiving and sending.
Format
debug dhcpv6_client packet [all | receiving | sending] state [enable | disable]
Parameters
all - Set packet receiving and sending debug flags.
receiving - Set packet receiving debug flag.
sending - Set packet sending debug flag.
state - Specify the state of the designated flags.
enable - Enable the designated flags.
disable - Disable the designated flags.
Restrictions
Only Administrator-level users can issue this command.
DGS-3120 Series Managed Switch CLI Reference Guide
228