D-Link DGS-3120-48PC Reference Manual page 306

®
xStack
32-5 enable gratuitous_arp
Description
The command is used to enable gratuitous ARP trap and log state. The switch can trap and log the
IP conflict event to inform the administrator. By default, trap is disabled and event log is enabled.
Format
enable gratuitous_arp {ipif <ipif_name 12>} {trap | log}(1)
Parameters
ipif - (Optional) Interface name of L3 interface
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
trap - Specify to enable the trap function.
log - Specify to enable the log function.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable system interface's gratuitous ARP log and trap:
DGS-3120-24TC:admin#enable gratuitous_arp ipif System trap log
Command: enable gratuitous_arp ipif System trap log
Success.
DGS-3120-24TC:admin#
32-6 disable gratuitous_arp
Description
The command is used to disable gratuitous ARP trap and log state. The switch can trap and log
the IP conflict event to inform the administrator. By default, trap is disabled and event log is
enabled.
Format
disable gratuitous_arp {ipif <ipif_name 12>} {trap | log}(1)
Parameters
ipif - (Optional) Interface name of L3 interface
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
trap - Specify to disable the trap function.
log - Specify to disable the log function.
DGS-3120 Series Managed Switch CLI Reference Guide
302