Chapter 71 Simple Mail Transfer Protocol (Smtp) Command List - D-Link DGS-3120-48PC Reference Manual

xStack
Chapter 71
enable smtp
disable smtp
config smtp {server <ipaddr> | server_port <port_number 1-65535> | self_mail_addr <mail_addr
254> | [add mail_receiver <mail_addr 254> | delete mail_receiver <index 1-8>]}(1)
show smtp
smtp send_testmsg
71-1 enable smtp
Description
This command is used to enable the SMTP status.
Format
enable smtp
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable SMTP status:
DGS-3120-24TC:admin#enable smtp
Command: enable smtp
Success.
DGS-3120-24TC:admin#
71-2 disable smtp
Description
This command is used to disable SMTP status.
®
DGS-3120 Series Managed Switch CLI Reference Guide
Simple Mail Transfer
Protocol (SMTP) Command
List
642